Main Menu Descriptions; Status; Test; Configuration - ADTRAN DSU IV ESP User Manual

Chapter 3. Operation

Main Menu Descriptions

The branches of the front panel Main menu are divided into
options for S

Status

S
DTE interfaces. The system returns to the S
idle. For more information, see Viewing Status Information on page
14-1.

Test

Use T
REMOTE
For more information, see Testing and Troubleshooting on page 13-1.

Configuration

Use C
parameters, configure testing and dialing options, select
management functions, and configure unit utilities.
This menu branch is divided into several chapters for easier
reference. The division includes a brief overview chapter followed
by a separate chapter for each of the six submenus: Configuring
Network Options on page 6-1, Configuring DTE Options on page 7-1,
Configuring Test Options on page 8-1, Configuring Dial Options on
page 9-1, Management Functions on page 10-1, and Configuring Unit
Utilities on page 11-1.

Dial

D
more information, see Activating Dial Functions on page 12-1.
The Dial selection in the Main menu is only available when a SW56
network type is selected or when a DBU card is installed in the rear of the
DSU IV ESP.
3-2
, T
TATUS
menus display all relevant information for the network and
TATUS
menus to control local and remote testing. Select
EST
testing, and the type of test and test pattern when required.
menus to select network and DTE operating
ONFIGURATION
provides manual dial backup or SW56 dial functions. For
IAL
DSU IV ESP User Manual
, C
EST ONFIGURATION
(C ), and D .
ONFIG IAL
display when
TATUS
LOCAL
61204011L1-1
or