ADTRAN DSU IV ESP User Manual page 56

Chapter 5. Configuration Overview
AT and V.25 commands have limited access to configuration
parameters. See AT Commands on page 5-5 and Appendix B, AT
Commands on page B-1 for more information. See Chapter 2,
Installation on page 2-1 and Chapter 3, Operation on page 3-1 for
more information on all other configuration methods. For an
example application using the SLIP/PPP or ethernet interface, see
Applications on page 4-1.
Descriptions of each Configuration menu item are given in the
following chapters: Configuring Network Options on page 6-1,
Configuring DTE Options on page 7-1, Configuring Test Options on
page 8-1, Configuring Dial Options on page 9-1, Management
Functions on page 10-1, and Configuring Unit Utilities on page 11-1.
A complete Configuration menu for the front panel is shown in
Figure 5-1 on page 5-3 and Figure 5-2 on page 5-4. The VT 100
menu tree is shown in Terminal Menu Structure on page C-1.
Due to the increased display capabilities, the VT 100 menu structure dif-
fers from the front panel interface. Appendix C, Terminal Menu Struc-
ture on page C-1 includes the VT 100 screens as well as a complete menu
tree for accessing configuration selections. Descriptions of individual
menu options are provided throughout this manual based on the front
panel menu structure. See Figure 5-1 on page 5-3 and Figure 5-2 on page
5-4 for the front panel configuration menu trees.
5-2 DSU IV ESP User Manual 61204011L1-1