Page 1
PRO Series 16km Range LoRa Telemetry Radio System Features: Ready to Use Telemetry Control • 2 Channels with feedback • 1km and 16km Versions • Supply: 12-32Vdc/ac or 110-230Vac • Transmitter: No Volt inputs • Receiver: Changeover Relay Contacts •...
Page 2
Pro Series Remote Telemetry Connecting the Inputs and Outputs The PRO-LORA system is supplied paired and ready to operate. If you require further details on pairing or erasing the system please see our 725 Series Datasheet. Transmitter input 1 is paired to Receiver Output 1 Transmitter input 2 is paired to Receiver Output 2 Activation of each input will cause the receiver output to activate.
Page 3
Pro Series Remote Telemetry Additional Features This system has several ‘optional’ features. These are summarised below. Additional Modules: Additional Input / Output modules or can be connected (max 16 of each). Transmitting a Watchdog Signal When enabled the 725TRX automatically transmits an intermittent ‘Watchdog’ signal according to the AUTO TX Interval Table.
Page 4
Pro Series Remote Telemetry Display Signal Strength This provides a signal strength / Walk Test Power Power Timer WatchDog Mode Pair Timer WatchDog Mode Pair Strength Strength 100% 100% NO COM NC NO COM NC WATCHDOG WATCHDOG NO COM NC...
Page 5
Pro Series Remote Telemetry Technical Specifications Transceiver : 725TRX Dimensions: 315 x 235 x 130mm Operating Temperature: -10 to +50 Celsius. Electrical Characteristics Typical Units Supply Voltage dc or ac 869.500 Frequency: RF Output Power (ERP) @ 869.50 MHz Supply Current : Quiescent...
Page 6
Buyers and other users should determine for themselves the suitability of any such information or products for their own particular requirements or specification(s). RF Solutions Ltd shall not be liable for any loss or damage caused as a result of user’s own determination of how to deploy or use R F Solutions Ltd’s products.
Need help?
Do you have a question about the PRO Series and is the answer not in the manual?
Questions and answers