Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for CAMBRIONIX MC14-2.4A
Summary of Contents for CAMBRIONIX MC14-2.4A
- Page 1 User Manual MC14-2.4A 2022/03 © 2021 Cambrionix Ltd. All rights reserved.
-
Page 2: Table Of Contents
1. Table of Contents 1. Table of Contents 2. Your MC14-2.4A at a glance 3. Safety 3.1. Signal word panel 3.2. Safety alert symbol 3.3. Pictograms 3.4. Product modification 3.5. Power supply 3.6. Storage and Installation 4. Getting Started 4.1. Opening your product 4.2. - Page 3 9. Compliance and Standards MC14-2.4A Page 2 of 20...
-
Page 4: Your Mc14-2.4A At A Glance
2. Your MC14-2.4A at a glance The MC14-2.4A has been designed primarily for desktop use, being highly compact and quiet. It provides 12W of charging power to each of its 14 USB 2.0 Type-A ports, allowing mobile devices to be charged quickly, safely and reliably. All ports can be controlled using Cambrionix software to allow charging and/or data transfer while monitoring important port and device information. -
Page 5: Safety
This manual has been arranged to follow IEC/ICEE 82079-1 standards. This is to facilitate the easier understanding and location of information relating to the MC14-2.4A. Any errors or omissions can be reported back using our support ticket system (see"Help and Support") this way any issues can be collected and fixed. -
Page 6: Safety Alert Symbol
Mandatory regulation 3.4. Product modification Cambrionix products are designed and manufactured to meet the requirements of UK and International safety regulations. Modifications to the product could affect safety and render the product non-compliant to relevant safety standards, which could result in injury or damage to the product. -
Page 7: Power Supply
Do not touch the power plug with wet hands Do not allow liquids to come into contact with the unit or power supply CAUTION Damage to your product may occur Do not short circuit the Power Supply Unit (PSU) supplied with your product MC14-2.4A Page 6 of 20... -
Page 8: Storage And Installation
Do not place the power cord near heat sources Connect the plug to an earthed socket CAUTION Damage to your Cambrionix product may occur Operate the product only in an environment where the ambient temperature is inside the operating temperature range... -
Page 9: Getting Started
This manual provides a reference for end-users who are installing for the first time and using their hub thereafter. As well as a guide for product safety-related information. The MC14-2.4A is intended to be used in an indoor static environment in which the environment falls within the tested specifications to provide charge, sync and management functionality. -
Page 10: Connecting To The Mains
This can be found on the Device Information Plate which is either on the underside or back of the unit. Including serial and PO numbers can help identify the product in question faster and speed up the process. MC14-2.4A Page 9 of 20... -
Page 11: Cleaning Your Mc14-2.4A
If there is a dirt/ spillage over a ventilation slot, external data/ power connector or product aperture, please remove power from the unit without touching the liquid and contact Cambrionix immediately Ensure that the product is switched off and the power cord is removed from the product. -
Page 12: Product Specifications
5. Product Specifications The MC14-2.4A is manufactured in the UK 5.1. Input Power Requirements Input Voltage 12Vdc Input Current Input Connection 4-pin DIN 5.2. Output Power Output Voltage 5.0V +/-5% Output Current (Max per Port) 2.4A Output Power (Max per Port) Output Power (Total) 174.72W... -
Page 13: Consumables And Placing Orders
5.5. Consumables and Placing Orders Below is a list of any Consumable products you may require for your MC14-2.4A including the cables you will require to connect devices to the hub. Cables 14 USB 2.0 Type-A If you require any spare parts, such as the power cables or cable, these can be ordered by... -
Page 14: Power Supply
Input Voltage 100-240VAC 4A @ 115VAC Input Current (Typical) 2A @ 230VAC Input Frequency 50-60Hz Input Connector Output Voltage Output Current Output Power (Max) 180W Output Connector 4-pin DIN Dimensions 210 x 85 x 46mm MC14-2.4A Page 13 of 20... -
Page 15: Troubleshooting
6. Troubleshooting If you experience any issues with your MC14-2.4A then please try the following solutions, if your issue is not addressed in this section then please contact your local vendor or Cambrionix. 6.1. Initial troubleshooting tips Some tips and information to check first. -
Page 16: Hub Connection Issues
Hub not connecting to host If you are seeing that the MC14-2.4A is not connecting to the host system, one of the issues may be caused by the USB drivers on your host system not being up to date. It is good practice... -
Page 17: No Gui
If you are using a headless system with no GUI then and you require to enable logging for support issues you can use the following command to create the logging cfg file manually: echo *=DEBUG>/etc/opt/cambrionix/cambrionix.log.cfg Then after re-producing the problem, you can zip the logs from the folder /var/log/cambrionix You may delete the file below when you are finished with it. -
Page 18: Disposal
August 12, 2005, and should not be disposed of as unsorted municipal waste. Please utilize your local WEEE collection facilities in the disposition of this product and otherwise observe all applicable requirements. Cambrionix PRN (Producer Registration Number) For the UK is "WEE/BH191TT". MC14-2.4A Page 17 of 20... -
Page 19: Returns And Damaged Products
If you have not purchased the Product(s) direct from Cambrionix please contact the vendor the item was originally purchased from for their returns process. Once you have notified Cambrionix of your return, Cambrionix will arrange for collection of the Product(s) or provide instructions and details for you to return the Product direct. - Page 20 Where Cambrionix arranges collection, return shipping will be free, unless Cambrionix notified you otherwise. MC14-2.4A Page 19 of 20...
- Page 21 9. Compliance and Standards CB Certificate CE Tested and marked FCC Part 15 Tested and marked RoHS Compliant Independently safety tested by the Underwriters Laboratory (UL) under file #E346549 Complies with EN60950 safety requirements for IT equipment MC14-2.4A Page 20 of 20...
- Page 22 The Maurice Wilkes Building Cowley Road Cambridge CB4 0DS United Kingdom +44 (0) 1223 755 520 enquiries@cambrionix.com www.cambrionix.com Cambrionix Ltd is a company registered in England and Wales with the company number 06210854 2022/03 © 2021 Cambrionix Ltd. All rights reserved.