Page 1
charge any USB device eco power saving mode user updatable an easier greener way to charge and recharge devices in one location...
Page 2
GoPro and Sony etc. rate, maximising battery life and cutting The series8 is designed to be future- power consumption. You can charge up proof: you can update the series8 to to eight devices from a single electrical...
FCC Rules. Output voltage (per port): 5.2V max. No user servicable parts inside. Danger of electric shock. Do not dismantle the series8 and only Waste Electrical and Electronic Equipment Directive – use the supplied power cable. WEEE (2002/96/EC) When this product is no longer required, if it cannot be re-used,...
Devices continue to charge in the background while in Party Mode. When a device is plugged into the series8 it is profiled. When profiled it will A wall-mounting kit is available. See our start charging. website for details.
Page 5
The red LED turns off. USB2.0 port: connect to your computer if you require updates. While the series8 is determining Be sure to keep an eye on our Twitter which device is connected the and Facebook pages for updates! white LEDs pulsate and the red LED is on.
Do not open or dismantle the them. case or you will void your warranty. If you suspect a fault with your series8 check out our website for more troubleshooting info.
Cleaning instructions Disconnect the power cable and all other cables that are connected. Use a soft, damp (not wet) lint-free cloth. Don’t get liquid into the apertures. Don’t use abrasive cleaning materials. Do not eat!
Notes for advanced users You can control and monitor via the VCP which enumerates when the mini-USB port is connected to a host. You can connect to the series8 with the following settings: 115,200 8N1. Type help at the command prompt. Contact us...
Need help?
Do you have a question about the series8 and is the answer not in the manual?
Questions and answers