Installing Cisco Unified Videoconferencing Desktop - Cisco MCS 7825 Series Installation Manual

Chapter 1 Installing Cisco Unified Videoconferencing Manager

Installing Cisco Unified Videoconferencing Desktop

During the installation you perform a basic Desktop configuration by defining servers which Desktop
uses. Follow recommendations in this section to configure Desktop correctly:
•
•
•
The Desktop serial key is required for the installation and operation of the Desktop and is not included
in this package. For more information about obtaining the serial key, refer to the
Instructions for
Procedure
Insert the product CD-ROM.
Step 1
In the CD menu, choose Install Cisco Unified Videoconferencing Desktop Server
Step 2
-or-
In the Windows folder on the product CD-ROM, double-click setup.exe file to launch the installer.
In the Choose Setup Language window, choose the installation language and click OK.
Step 3
In the Welcome window, click Next.
Step 4
In the License Agreement window, read the agreement, choose I accept the terms in the license
Step 5
agreement, and then click Next.
In the Customer Information window, enter information for software registration, choose the user access
Step 6
option for Desktop, and then click Next.
In the Cisco Unified Videoconferencing Desktop Desktop Serial Key window, enter the Desktop key
Step 7
number, and click Next.
In the Custom Setup window, define which Desktop components to install on this server, specify the
Step 8
installation location, and then click Next.
Note
In the Cisco Unified Videoconferencing Desktop Network Configuration window, configure the Desktop
Step 9
Network Interface and Desktop web server port, and click Next.
OL-14925-01
In a single Cisco Unified Videoconferencing 3545 MCU deployment, use the same gatekeeper as
Cisco Unified Videoconferencing 3545 MCU is configured to use. If you install Cisco Unified
Videoconferencing Manager as a part of your deployment, specify the Cisco Unified
Videoconferencing Manager internal gatekeeper.
In a multiple Cisco Unified Videoconferencing 3545 MCU deployment, you must use Cisco Unified
Videoconferencing Manager as your meeting control server. In a single Cisco Unified
Videoconferencing 3545 MCU deployment, you can use either Cisco Unified
Videoconferencing 3545 MCU or Cisco Unified Videoconferencing Manager.
The default Desktop web server port is 80, but if it is used by another application, the installer
detects it and prompts you to specify a different port.
If you wish to use HTTPs protocol for security, you must configure the Desktop web server port to
443 after the installation is complete.
Cisco Unified Videoconferencing Manager.
The default directory for Cisco Unified Videoconferencing Streaming Server installation in
version 5.5. is C:\Program Files\Darwin Streaming Server.
For a single server installation, install both components.
Installation Guide for Cisco Unified Videoconferencing Manager Release 5.5
How to Install Cisco Unified Videoconferencing Manager
License Fulfillment
1-5