Table of Contents
Advertisement
Chapter 1
Installing Cisco Unified Videoconferencing Manager
If you choose to connect to an existing database server, enter the server name, port, database name, user
Step 15
login ID and password in the Existing Database Server Information window. This information is needed
to connect to an existing database.
Verify that the existing database is empty and click Next.
Step 16
Step 17
Enter mail server information in the Outgoing Mail Server Information window. To confirm that the
e-mail server is functioning, enter an e-mail address. If the e-mail server is functioning correctly, you
receive a test e-mail.
Note
Create an administrator account for accessing the application in the Account Login Information window.
Step 18
With this account, you can access Cisco Unified Videoconferencing Manager.
Review the installation summary in the Pre-installation Summary window, and then click Install to
Step 19
proceed with the installation.
Do not interrupt the installation. After starting the Cisco Unified Videoconferencing Manager service
Note
allow several minutes for server initialization before logging in to the web-user interface.
Installing Cisco Unified Videoconferencing Desktop
During the installation you perform a basic Desktop configuration by defining servers which Desktop
uses. Follow recommendations in this section to configure Desktop correctly:
•
•
•
•
OL-16908-01
If SMTP server fields are left blank, e-mail messages are not sent.
In a single Cisco Unified Videoconferencing 3545 MCU deployment, use the same gatekeeper as
Cisco Unified Videoconferencing 3545 MCU is configured to use. If you install Cisco Unified
Videoconferencing Manager as a part of your deployment, specify the Cisco Unified
Videoconferencing Manager internal gatekeeper.
In a multiple Cisco Unified Videoconferencing 3545 MCU deployment, you must use Cisco Unified
Videoconferencing Manager as your meeting control server. In a single Cisco Unified
Videoconferencing 3545 MCU deployment, you can use either Cisco Unified
Videoconferencing 3545 MCU or Cisco Unified Videoconferencing Manager.
The default Desktop web server port is 80. If other applications are using port 80, the installer
prompts you to specify a different port.
If you wish to use port 80 in such cases, access the Services panel on your computer and disable the
IIS Administration, HTTP SSL and World Wide Web Publishing services. You can do this before
installing the Desktop server software or when you receive the "ip address/ port is in use" error
during installation.
After disabling these services, installation completes normally and Desktop clients can connect to
the Desktop server using port 80.
If you wish to use the HTTPs protocol for security, configure the Desktop web server port to 443
after installation is complete.
Installation Guide for Cisco Unified Videoconferencing Manager Release 5.6
How to Install Cisco Unified Videoconferencing Manager
1-5
Advertisement
Table of Contents
