Advertisement
1.
A
Stabiliser Foot (Full)
Loosely insert the inner plate (B) into the stabiliser foot (A).
3.
Insert the 650w/850w/1050w (module dependent) side panel (D-1) into the stabiliser
foot (A). Attach to the side of the panel with a rounded corner & not the side with
screws, please see above image for reference.
DEN.Panel Assembly Instructions
B
Inner Plate
D -1
1950w Module = 650w Side Panel
2550w Module = 850w Side Panel
3150w Module = 1050w Side Panel
2.
4.
Tighten the 4x M8 grub screws (C) to push the inner plate into the Den panel to
secure it. This is best done by tightening each screw (C) 2x turns in sequence to
ensure the plate is being pushed in an equal distance by each of the screws (C) and is
parallel to the vertical plate stabiliser foot.
C
M8 grub screws
(x4)
4mm allen key
DWG No: SASS-0068
Revision: A (09/11/15)
Drawn by: CE
Drawn date: 14/07/15
Advertisement
