Advertisement
9.
After making sure all of the screws are engaged in the keyholes, tap the top of the
650w/850w/1050w (module dependent) side panel (D) with a cushioned mallet to fully
engage(as shown above).
11.
After making sure all of the screws are engaged in the keyholes, tap the top of the
second 650w/850w/1050w (module dependent) side panel (D) with a cushioned
mallet to fully engage (as shown above).
DEN.Panel Assembly Instructions
10.
Lift the the second 650w/850w/1050w (module dependent) side panel (D)/foot (A)
sub-assembly (from step 4) and insert the modular screws into the keyholes in the
650w/850w/1050w (module dependent) intermediate panel (E), making sure that all of
the screws have engaged into the keyholes.
12.
Tighten the 8 x M8 grub screws in the 2x central stabiliser feet to secure them (see
step 4 for method).
D-2
1950w Module = 650w Side Panel
2550w Module = 850w Side Panel
3150w Module = 1050w Side Panel
4mm Allen key
DWG No: SASS-0068
Revision: A (09/11/15)
Drawn by: CE
Drawn date: 14/07/15
Advertisement
