Technical Data; Dimensions - Graco A Series Instructions-Parts List Manual

TECHNICAL DATA

Power Requirements . . . . . . . . . . . . . . . . . . .
Working Pressure Range . . . . . . . . .
Cycles/Gallon (liter) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum Delivery . . . . . . . . . . . . . . . . .
Power Cord . . . . . . . . . . . . . .
Inlet Paint Strainer . . . . . . . . . . . . . . . .
Outlet Paint Filter . . . . . . . . . . . . . . . . . .
Pump Inlet Size . . . . . . . . . . .
Fluid Outlet Size . . . . . . . . . . . . . . . .
Wetted Parts:
Displacement Pump . . . . . . . . . . .
Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PTFE
120 VAC, 60Hz,
1 phase, 15 amp minimum
0–3000 psi (0 – 210 bar)
260 (70)
0.6 GPM (2.3 liter/min
No. 14 AWG, 3 wire, 8'6" (2.6 m)
16 mesh (1190 micron)
Stainless Steel Screen, reusable
60 mesh (250 micron)
Stainless Steel Screen, reusable
3/4 npt(m) with 20 ID chamfer
1/4 npsm from fluid filter
Stainless steel, PTFE
plated steel, polyethylene, brass
Plated steel

DIMENSIONS

Weight (dry w/o packaging)
Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DIMENSIONS
DANGER LABELS
The English language DANGER label shown on page
1 is also on your sprayer. If you have painters who do
not read English, order one of the following labels to ap-
,
ply to your sprayer. The drawing below shows the best
placement of these labels for good visibility.
Order the labels directly from Graco, free of
charge.
Toll Free: 1–800–423–8594
In Minnesota: 1 –612–623–6921
French 185–957
Spanish 185–959
German 186–039
Greek 186–043
Korean 186–047
English 185–591
. . . . . . . . . . . . . . . . . 95 lb (43 Kg)
20 in. (508 mm)
29 in. (737 mm)
18 in. (457 mm)
Apply other
language here
307–958