Table of Contents
Advertisement
VELBUS INSTALLATION GUIDE
7 HELP! WHAT HAVE I DONE WRONG?
Once everything is connected to the Velbus CAN bus cable and your
configuration PC is connected via a configuration module (VMB1USB, VMB1RS
or VMBRSUSB), you should be able to scan the bus and see all of the connected
modules appear in the configuration software "Velbuslink".
If this is not the case, there may be several reasons:
The bus cannot be scanned correctly due to an incorrect Windows
device driver
During the installation of Velbuslink, the necessary drivers should
automatically be installed in the folder
C:\Program Files\Velleman\Velbuslink\Driver
or
C:\Program Files (x86)\Velleman\VelbusLink\Driver
If necessary, you can manually install this driver into your Windows system. To
do so, open your Windows Start menu and do a search for devmgmt.msc (or
Device Manager). Start this program and scroll down to "Ports (COM & LPT)".
Display the contents of the "Ports (COM & LPT)" category by clicking on the
small triangle to the left. Right click on "VMB1USB Velbus USB Interface" and
select "Update driver".
©2015 Velbus
63
www.velbus.eu
Advertisement
Table of Contents
