Table of Contents
Advertisement
VELBUS INSTALLATION GUIDE
DIN RAIL DIMMER MODULES
Depending on the type of load, you will need a particular dimmer.
To directly connect your mains voltage lighting circuits you can use the Velbus
VMDBMI-R dimmer module, or a Velbus four-channel 0-10 V control VMB4DC
together with dimmers that use 0-10V analogue signalling as input (e.g. the
Velbus VMB2LEDDC or third party mains dimmers).
For dimming LED strips (PWM) we have the VMB2LEDDC 0-10 V 2-channel
dimmer to be used in combination with the dimmer controller module
VMB4DC.
For more information about dimming with Velbus, please refer to
www.velbus.eu
(dimmer products pages, FAQ and downloads).
©2015 Velbus
16
www.velbus.eu
Advertisement
Table of Contents
