Getting Started With A New Project - Velbus VMB4RYLD Installation Manual

VELBUS INSTALLATION GUIDE
By then writing your Velbuslink project to the physical modules
("synchronizing") these actions (and other settings) will then be written into
the memory maps of the modules.
Synchronizing can be done in two directions: "reading" and "writing".
In Velbuslink "reading" means: copying the physical module's contents to the
PC, overwriting the Velbuslink project. "Writing" means: copying the Velbuslink
project from your PC to the memory maps of the modules, overwriting the
latter.

GETTING STARTED WITH A NEW PROJECT

Creating a new Velbuslink project
We will assume from this step on that you are working with a live Velbus
installation, connected to your PC with a USB cable. Make sure none of your
Velbus modules are in error mode (LEDs blinking several times, pause, then
blinking again). In case of errors, please refer to "HELP! What have I done
wrong?" on p.63 and solve the problems before continuing.
After having installed and started Velbuslink, click "New" or "New Project" to
start a wizard that will guide you through the process of creating a new project.
©2015 Velbus 29 www.velbus.eu