Picture Adjustments - Sharp Notevision PG-C20XE Operation Manual

Picture Adjustments

Projector
ON/OFF
LAMP
POWER
TEMP.
KEYSTONE
INPUT AUTO SYNC
BACK ENTER MENU
(GUI) On-screen Display
INPUT 1 (RGB) mode
INPUT 1 (COMPONENT) mode
INPUT 2 (S-VIDEO) or INPUT 3 (VIDEO) mode
E-27
Remote control
2, 3, 4
2, 3
1, 5
You can adjust the projector's picture to your prefer-
ences with the following picture settings.
Description of Adjustment Items
Selected item ƒ button
Contrast For less contrast
Bright For less brightness
Red For weaker red
Blue For weaker blue
Reset All image adjustment items are returned to the factory preset
settings.
Color For less color intensity
Tint Skin tones become purplish
Sharp For less sharpness
• "Color", "Tint" and "Sharp" do not appear in the INPUT 1
(RGB) mode.
• "Tint" does not appear when receiving "PAL", "SECAM",
"PAL M", "PAL N" or "PAL (60 Hz)" in the S-VIDEO or VIDEO
mode.
1 Press MENU.
2 Press ∂/ƒ to select "Picture" in INPUT 1 (RGB)
mode, or to select "Picture1" or "Picture2" in
INPUT 1 (COMPONENT), INPUT 2 (S-VIDEO) or
INPUT 3 (VIDEO) mode, and then press ENTER.
3 Press ∂/ƒ to select a specific adjustment item,
and then press ENTER.
4 Press ∂/ƒ to move the
adjustment item to the desired setting.
5 To exit from the GUI, press MENU.
• To reset all adjustment items, select "Reset", and then press
ENTER.
• The adjustments can be stored separately in the INPUT 1,
INPUT 2 and INPUT 3 modes.
∂ button
For more contrast
For more brightness
For stronger red
For stronger blue
For more color intensity
Skin tones become greenish
For more sharpness
mark of the selected