Picture Adjustments; Adjusting The Picture; Contrast 30; Picture - Sharp XV-Z7000U Operation Manual

Picture Adjustments

Projector
ON/OFF
LAMP
POWER
2, 3, 4
TEMP.
KEYSTONE
2, 3
INPUT PICT MODE
BACK ENTER MENU
1, 5
(GUI) On-screen Display
INPUT 1 or 2 (COMPONENT) mode
INPUT 2 (RGB) mode
S-VIDEO or VIDEO mode
Remote control

Adjusting the Picture

You can adjust the projector's picture to your prefer-
VOL
ences with the following picture settings.
POWER
Description of Adjustment Items
MUTE
BACK
Selected item
MENU
Contrast
ENTER
Bright
Red
Blue

Reset

Color

Tint

Sharp

• "Signal Type" does not appear when the INPUT 1
(COMPONENT) mode is selected.
• "Progressive" only appears when receiving a 480i signal in
the INPUT 2 (COMPONENT) mode.
• "Color", "Tint" and "Sharp" do not appear in the INPUT 2
(RGB) mode.
• "Tint" does not appear when receiving "PAL", "SECAM",
"PAL M", "PAL N" or "PAL (60Hz)" in the S-VIDEO or VIDEO
mode.
1 Press MENU.
2 Press ∂/ƒ to select "Picture1" or "Picture2" in
3 Press ∂/ƒ to select a specific adjustment item,
4 Press ∂/ƒ to move the
5 To exit from the GUI, press MENU.
• To reset all adjustment items, select "Reset", and then press
ENTER.
• The adjustments can be stored separately in the INPUT 1,
INPUT 2, S-VIDEO and VIDEO modes.
ƒ button
For less contrast
For less brightness
For weaker red
For weaker blue
All image adjustment items are returned to the factory preset
settings.
For less color intensity
Skin tones become purplish
For less sharpness
INPUT 1 or 2 (COMPONENT), S-VIDEO or VIDEO
mode, or to select "Picture" in INPUT 2 (RGB)
mode, and then press ENTER.
and then press ENTER.
adjustment item to the desired setting.
∂ button
For more contrast
For more brightness
For stronger red
For stronger blue
For more color intensity
Skin tones become greenish
For more sharpness
mark of the selected
E-24