Spare Parts; Warranty; Eu Declaration Of Conformity - Kärcher HD 1040 B Manual

English

Spare parts

Please remember that the use of spare
parts which are not original parts may
cause malfunctions and/or result in serious
accidents, or operation of the unit may be
hazardous if these parts have not been
correctly constructed or the defective
component is not replaced correctly.
Therefore only use original spare parts.
A selection of the spare parts required most
frequently can be found at the end of the
operating instructions.

Warranty

The warranty terms issued by our
authorised marketing company are valid in
every country. We remedy any fault in the
cleaner free of charge within the warranty
period providing the cause of the fault
proves to be a material or manufacturing
error.
The warranty only becomes operative
when your dealer has completed the reply
card accompanying the sale of the unit, has
stamped and signed it and you have then
sent the reply card to the marketing
company in your country.
Should you wish to call upon the guarantee,
please apply to your dealer or nearest
authorised Customer Service centre taking
along also the accessories and bill of sale.
Regulation for the
prevention of accidents
Please comply with the currently valid
regulations in your country.
Operating Instructions HD 1040 B
EU Declaration of
Conformity
We hereby declare that the equipment described below
conforms to the relevant fundamental safety and health
requirements of the appropriate EU Directives, both in
its basic design and construction as well as in the
version marketed by us.
This declaration will cease to be valid if any
modifications are made to the machine without our
express approval.
Product: High-pressure cleaner
Model: 1.810-xxx
Relevant EU Directives:
EU Machinery Directive (98/37/CE)
EU Low-Voltage Equipment Directive (73/23/EEC)
amended by 93/68/EEC
EU Directive on Electromagnetic Compatibility
(89/336/EEC) amended by 91/263/EEC, 92/31/EEC,
93/68/EEC
EC directive on noise emissions (2000/14/EU)
Harmonised standards applied:
DIN EN 60 335-1
DIN EN 60 335-2-79
DIN EN 50 082-2: 1994
National standards applied: CISPR 12
Applied conformity evaluation procedure: Appendix V
Measured sound power level: 108 dB(A)
Guaranteed sound power level: 109 dB(A)
Appropriate internal measures have been taken to
ensure that series-production units conform at all times
to the requirements of current EU Directives and
relevant standards.
The signatories are empowered to represent and act
on behalf of the company management.
S. Reiser H. Jenner
Alfred Kärcher GmbH & Co.
Cleaning Systems
D-71349 Winnenden
Alfred Kärcher Kommanditgesellschaft.
Sitz Winnenden.
Registergericht: Waiblingen, HRA 169.
Persönlich haftende Gesellschafterin:
Kärcher Reinigungstechnik GmbH. Sitz Winnenden,
2404 Registergericht Waiblingen, HRB
Geschäftsführer: Dr. Bernhard Graf, Hartmut Jenner,
Georg Metz, Thomas Schöbinger
19