Creating A Connection To The Mains Power Supply; Creating Connections To Mains Water And Drainage - Kärcher CWP 2000 Operating Instructions Manual

CWP 2000
For technical personnel only
I System installation
5.959-373 A 2006471 (06/03)
Operating Instructions
Unpacking
Caution!
There is a risk of injury from protruding nails when the
crate is being opened.
Take out the accessories packed between the gantry
columns.
Check that the consignment is complete against the
accompanying documents and check for possible
damage during transportation!
The transport company must be notified in writing
immediately if the transportation crate has suffered
damage.
I.2 Creating a connection to the
mains power supply
!
Danger!
Dangerous voltage!
Electrical installation may be carried out only by a trained
electrician in accordance with local standards.
Risk of electric shock!
– The system may only be connected to a properly
earthed current supply.
– All current-carrying parts in the work area must be
protected from spray water.
For connected values see Table D.4
I.3

Creating connections to mains water and drainage

i
Important!
If the system is being connected to the drinking water
supply, local regulations regarding isolation from the
mains supply should be observed.
In Germany, the regulations to be observed are those
of the DVGW, in particular DIN 1988.
For connected values see Table D.4
!
Danger!
Risk to the environment from waste water.
Local regulations should be observed with regard
to the disposal of waste water.
English
I4