G Troubleshooting - Kärcher CWP 2000 Operating Instructions Manual

CWP 2000

G Troubleshooting

Fig. G.0: Control cabinet
5.959-373 A 2006471 (06/03)
Operating Instructions
11.1
!
Danger!
Danger – possibility of electric shock.
– Work on the electrical system may only be carried out
by trained electricians.
– Make the system voltage-free for all work carried out
on the system by switching the system master switch
(11.1) to "0" and securing it against being switched on
again.
Who is permitted to remedy faults?
n Operator
Tasks which are indicated "Operator" may only
be carried out by suitably instructed personnel who
have the capability of servicing and maintaining the
washing system properly.
n Trained electricians
People who have been professionally trained in
electrical engineering.
n Customer Service
Tasks which are indicated "Customer Service" may
only be carried out by Kärcher Customer Service
maintenance personnel.
Switching the system OFF
n Before commencing work, set the master switch
to "AUS" (OFF), and protect against inadvertent
reactivation.
Fault repairs
n Repair the indicated and/or identified fault.
Switching the system ON
n Start the system; turn the master switch to "EIN" (ON).
Return the gantry to the rest position, if required.
English
G1