Table of Contents
Advertisement
English
E Operating procedure
a
b
c
E2
Operating Instructions
E.4 Preparations to be made by the user
n Prepare the vehicle for washing
Caution!
To avoid damage being done to the vehicle, the following
precautionary measures must be undertaken on the
vehicle before the start of the washing process:
n close windows, doors and roof cavities
n retract aerials, turn them back towards the boot or
detach them
n fold back large or grossly projecting wing mirrors
n examine vehicle for loose parts and detach these, e. g.
– ornamental strips
– spoilers
– bumpers
– door handles
– exhaust pipes
– air deflectors
– tarpaulin ropes
– sealing rubbers
– sun visors fixed to the exterior
– roof racks
E.5 Driving in
E.5.1 Position using the wheel trough (Option)
Drive the vehicle into the system in such a way that the
front wheel on the driver's side is positioned in the wheel
recess.
E.5.2 Positioning light (optional)
Types of start
If the system is at the start position, one of the top signal
lights in the positioning light lights up. Which signal light
lights up is dependent on the type of start.
Start-type
Standard
Time-delayed
For a description of the types of start, see operating
instructions of the wash-card reader.
While driving into the wash bay the positioning lights
mounted at the top right of the gantry show you whether
you should
n "drive forward" (a)
n "stop" = position is correct (b)
n "reverse" (c).
Signal lamp lights up
"Forwards"
"Stop"
5.959-373 A 2006471 (06/03)
CWP 2000
Advertisement
Table of Contents
