Extending The Hydraulic Pick-Up Hitch - Valtra Versu N Series Operator's Manual

GUID-288EE569-37CE-4942-B519-2E306B7CEAFD
1. Lifting/lowering switch
2. Lifting push button
3. Lowering push button
1. Reverse the tractor up to the trailer/implement.
2. Align the pick-up hitch hook or drawbar pin to the eye of the trailer/implement
beam.
3. Press the symbol side of the lifting/lowering switch or the lifting push button
until the hitch latches.
You can hear a click and the trailer hitch release lever jumps a little.
4. Press the lifting/lowering switch side opposite to the symbol or the lowering
push button to lower the linkage slightly.
Ensure that the hitch is supported by the latch and does not lower with the
linkage.
5. Check the linkage position.
IMPORTANT: Adjust the linkage so that it does not hit the towed device or
power take-off shaft at any circumstance.
3.24.4.3

Extending the Hydraulic pick-up hitch

When the frame of the towing device is lowered, you can extend it hydraulically
backwards to make it easier to attach the trailer hitch/drawbar/Ø80mm ball hitch
to the drawbar eye. The cylinder of the hydraulic extension is connected
permanently to the rear on/off valve 2.
1
2 3
WARNING: When using a trailer, make sure that the hitch latch is
locked.
- 309 -
3. Operation