Table of Contents
Advertisement
3.4.2
Using the follow-me-home functionality
In the follow-me-home functionality, the front waist working lights (optional) are
still on even if the power is turned to the
•
To use the follow-me-home functionality, turn the ignition key to the
(OFF) position and open the door before the main power turns off.
The follow-me-home functionality activates automatically at the same time as
the cab lights. The follow-me-home lights turn off when the cab lights or the
main power turn off.
NOTE: The main power is not turned off if the hazard warning flasher or the
parking lights are turned on. If the door is left open in such a situation, the
cab lights and the follow-me-home lights are turned off after about 10
minutes.
3.4.3
Using the working lights
The parking lights or the headlights must be switched on before you can use the
light panel. If the parking lights or the headlights are not switched on and you try
to use the light panel, the symbol on the light panel on/off button blinks few times.
1
GUID-F64DE483-75FF-4D51-9A29-17BDA57EDD55
1. Light panel on/off button
2. Front working lights
3. Front waist working lights (optional)
4. Rotary beacon light (optional)
5. Rear working lights
6. Automatic operation of the rear working lights
7. Trailer hitch light (optional)
8. Rear waist working lights (optional)
9. Automatic operation of the rear waist working lights (optional)
With the Skyview equipment, the button for the rear working lights also turns on
the side working lights.
1. Turn the light switch to parking lights or headlights position.
The light panel and working lights turn on if the light panel and working lights
were on when the power was previously shut down.
2
3
4
- 93 -
(OFF) position and you exit the cab.
5
6
7
8
9
3. Operation
Advertisement
Table of Contents
