Setting The Driving Start Automatics - Valtra Versu N Series Operator's Manual

3. Operation
shuttle. The driving start automatics engage the four-wheel drive automatically,
regardless of the level of wheel slip.
If the clutch pedal has been pressed while starting to drive or when changing the
driving direction, the four-wheel drive remains engaged until the clutch pedal is
fully released.
If the clutch pedal has been pressed while driving, the driving start automatics
engages when releasing the clutch pedal.
NOTE: Driving start automatics operates only when the driving speed is under 10
km/h.
The driving start automatics is controlled from the tractor terminal by activating
and deactivating the function or setting the time that the four-wheel drive remains
engaged.
3.8.20.2

Setting the driving start automatics

The driving start automatics is set through the tractor terminal transmission
settings.
1. Press ESC.
2. Navigate to the menu 2 with the up and down arrow buttons.
3. Press the right arrow button to enter the transmission settings view.
NOTE: When the power shuttle lever is in the parking brake position (P), you
can enter the transmission settings view by pressing the preprogramming
button.
4. Move the navigation box to the driving start automatics position
arrow buttons.
A short press moves the box in the selected direction one field at a time. A
long press moves the box in the selected direction continuously.
SET
GUID-2F7242DA-D728-4250-AD7E-59B61FA7538A
1. Setting the driving start automatics
5. Select the desired status of the driving start automatics with the up or down
arrow button.
•
•
1
2 3
x
4
F R
x
4
C D x
AUTO
1150 2050
AUTO 2
F/R
When the box is checked the driving start automatics is engaged.
When the box is not checked the driving start automatics is disengaged.
- 150 -
1
2
with the
F R