Specified Conditions Of Use; User Groups - Weller WXP 65 Translation Of The Original Instructions

For your safety
Warning! Fire and explosion hazard!
Hot tools represent a fire hazard
Always place the soldering tool in the safety rest while not in use.
„
Do not place or leave the hot soldering or desoldering tip on the worktop or on plastic surfaces.
„
Avoid unintentional operation. Disconnect the soldering tool from the power supply while not in
„
use.
Do not direct hot air soldering tools at people or inflammable objects.
„
Keep explosive and flammable objects well away from the device.
„
Do not cover the device.
„

Specified Conditions Of Use

Use the soldering / desoldering iron exclusively for
the purpose indicated in the operating instructions
of releasing, accommodating and depositing elec-
tronic components under the conditions specified
herein.
WXDP 120 (Robust), WXDV 120
Flammable gases and liquids may not
be extracted.
The device may only be used with cor-
rectly fitted and suitable filter cartridges.
Replace filter cartridges when full.

User groups

Due to differing degrees of risk and potential hazards, several work steps may only be performed by
trained experts.
Work step
Replacing electrical replacement parts
Default maintenance intervals
Operation
Filter change
Operation
Filter change
Replacing electrical replacement parts
26
Intended use of the soldering station/ desoldering
station also includes the requirement that you
adhere to these instructions,
„
observe all other accompanying documents,
„
comply with national accident prevention
„
guidelines applicable at the place of use.
The manufacturer will not be liable for unautho-
rised modifications to the device.
User groups
Electricians
Safety expert
Non-specialists
Technical trainees under the guidance and supervision
of a trained expert