For Your Safety; Safety Information - Weller WXP 65 Translation Of The Original Instructions

For your safety

Thank you for the confidence you have shown in
buying this device.
The device has been manufactured in accordance
with the most rigorous quality standards which
ensure that it operates perfectly.
Read these instructions and the
accompanying safety information
carefully before starting up the device
and starting work with the device.
Keep these instructions in a place that is acces-
sible to all users.

Safety information

For safety reasons, children
and youths under the age of 16,
as well as persons who are not
familiar with these operating inst-
ructions, may not use the device.
Children should be supervised in
order to ensure that they do not
play with the tool.
Warning! Electrical shock
Carefully read the attached safety information, the safety information accompanying these
„
operating instructions as well as the operating instructions for your control unit before putting
the control unit into operation and observe the safety precautions specified therein.
The soldering iron may only used in combination with Weller WX Supply Units.
„
Do not work on electrically live parts. Antistatic plastics are provided with conductive fillers to
„
prevent the build-up of static charge. This also reduces the insulating properties of the
plastic.
Repairs must always be referred to a Weller-trained specialist.
„
If the supply cord of this power tool is damaged, it cannot be replaced, and the power tool
„
shall be scrapped..
Warning! Risk of burns
The soldering tip becomes hot during soldering and desoldering processes. There is
a risk of burns from touching the tips. Tools may still be hot long after they have been
switched off.
Only connect the vacuum and hot air at the designated points.
„
Do not direct hot air soldering tools at people or inflammable objects.
„
Do not touch the hot soldering tips and keep them away from inflammable objects.
„
These instructions contain important information
which will help you to start up, operate and service
the device safely and correctly as well as to elimi-
nate simple faults and malfunctions yourselves.
The device has been manufactured in accordance
with state-of-the-art technology and acknow-
ledged regulations concerning safety.
There is nevertheless the risk of personal injury
and damage to property if you fail to observe the
safety information set out in the accompanying
booklet and the warnings given in these instruc-
tions.
This device is not intended
for use by persons (including
children) with limited physical,
sensory or mental aptitude, or
by persons who lack knowledge
or experience in handling the
device.
25