BESAFE iZi Flex S FIX User Manual page 4

12
Removing and refitting the cover
• Do take care when you remove the cover, as re-fitting the cover is
the reverse process.
• Start to take off the backrest part first and re-fit the backrest part
as the last part.
• For washing instructions, see the washcare label on the inside of
the fabric cover.
! Warning: potential misuse
• For the correct usage of the airbag in combination with the seat
read the vehicle handbook.
• Make sure the indicators are green before you drive.
• Make sure the back of the seat is touching the backrest of the
vehicle seat and the isofix connectors are pushed inside the seat as
far as possible. The red surface on top of the ISOfix release handle
must not be visible during driving.
• Make sure that the SIP bumpers are always connected with the
seat on the doorside and connected with the seat on the inner side
of the vehicle when there is enough space available.
Guarantee
• Should this product prove faulty within 24 months of purchase due to
materials or manufacturing fault, except covers and harness straps,
please return it to the original place of purchase.
• The guarantee is only valid when you use your seat appropriately and
with care. Please contact your retailer, they will decide if the seat will
be returned to the manufacturer for repair. Replacement or return
cannot be claimed. The guarantee is not extended through repair.
• The guarantee expires when there is no receipt, when defects are
caused by incorrect or improper use, when defects are caused by
abuse, misuse or negligence.
13