Deleting A Backup Port Entry; Updating The State Of A Backup Port Entry - Compaq Netelligent 2524 User Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4. Move the cursor to the Backup Port entry field. Then enter the number of
the desired backup port.
5. Move the cursor to the State Entry field and press the space bar to select
Enable or Disable.
6. Move the cursor to the Action field and press the space bar until Add
appears.
7. Press the Enter key. The new backup port entry appears in the backup port
configuration list.

Deleting a Backup Port Entry

To delete a backup port entry, follow these steps:
1. When the cursor at the Action field, press the - or + keys to highlight a
backup port entry.
2. Move the cursor to the Action field and press the space bar until Delete
appears.
3. Press the Enter key.
When you delete an entry, the backup port remains disabled. To enable the port,
see the section "Port Statistics" in this chapter.
Updating the State of a
Backup Port Entry
To update the state of a backup port entry, follow these steps:
1. Press the - or + keys to highlight a backup port entry.
2. Move the cursor to the State entry field.
3. Press the space bar until the desired option (Disabled or Enabled) appears.
4. Press the Enter key.
Netelligent 2524/2624 and 3512/3612 100Base-T Repeater User Guide
4-13