Compaq Netelligent 2524 User Manual page 19

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-8 Overview
LED
COL (Collision)
Flashing Yellow
OFF No collisions are occurring
Solid Green
RJ-45 Ports
Flashing Green
Link Status
Solid Yellow
OFF Link test failure or no connection to the port.
PWR (Power -
OFF Power is OFF to the repeater.
Models 2524
Solid Green
and 2624)
PWR A and
Solid Green
PWR B (Power
Solid Yellow
Supply A/B -
Off Power supply not installed
Models 3512
and 3612)
Unmanaged Repeater (Model 2524)
OFF The repeater is not currently managed; waiting for the 2624 to start.
Solid Green
Solid Yellow
2524/2524 (unmanaged) stack, you have set both repeater dip switches to TARGET or to HOST. In this
stack, set one dip switch to TARGET and the other to HOST.
Flashing Green
HUB STATUS
enables from the 2624 managing repeater. Reset the 2524 dip switch to MAN.
(Models 2524
and 2624)
Managing Repeater (Model 2624)
OFF Basic firmware failure preventing the firmware from functioning correctly
Solid Green
Solid Yellow
Flashing Yellow
Flashing Green
have set a 2524 repeater dip switch(es) to UNM. This setting overrides the non-volatile port enables
from the 2624 managing repeater. Reset the 2524 dip switch(es) to MAN.
Table 1-1
LED Operations and Descriptions (All Models)
Status and Meaning
Global collisions are occurring anywhere in the repeater's collision domain
Successful link test
Port activity
Port has been partitioned/disabled
Power is ON to the repeater.
Power supply installed and operating properly
Power supply installed but not operating properly
The repeater is currently managed.
The repeater is isolated from the backplane or is not in a stack. In a two-repeater
The 2524 repeater dip switch is set to UNM, which overrides the non-volatile port
The repeater successfully finished POST and is ready to manage.
The repeater is booting up and is not ready to manage.
The POST failed.
In a stack with one 2624 managing repeater and one or more 2524 repeaters, you