Compaq Netelligent 2524 User Manual page 54

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-9
Figure 3-6. Stack Connecting One 2624 and Two 2524 Repeaters with Backplane Connectors
In this example, the 2624 repeater (top repeater in the stack) manages two 2524
repeaters. The dip switches on both 2524 repeaters are set to "TARGET," as
required in a managed stack.
Figure 3-7 shows two 2524 repeaters connected via a backplane connector
between the EXPN PORTs. The dip switches on the 2524 repeaters are set with
the top repeater as the HOST and the bottom repeater as the TARGET.
Figure 3-7. Interconnecting Two 2524 Repeaters Via a Backplane Connection Cable
Netelligent 2524/2624 and 3512/3612 100Base-T Repeater User Guide