Compaq Netelligent 2524 User Manual page 47

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-2 Installing the Repeater
To rack mount the repeater, follow these steps:
1. Position the right bracket as shown in Figure 3-1 and attach it to the
repeater using four of the smaller, 3/8-inch bracket screws. Then tighten
the screws. Repeat this step to attach the left mounting bracket.
Figure 3-1. Attaching the Mounting Brackets
2. After you attach both mounting brackets, position the bracket slots over
the desired holes on the rack (Figure 3-2). Then insert and tighten the
four 1/2-inch rack-mount screws.
Figure 3-2. Positioning the Repeater in a Rack