Compaq Netelligent 2524 User Manual page 103

100base-t repeaters
Table of Contents

Advertisement

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
G-14
Glossary
Telnet
A protocol in the TCP/IP suite of protocols that controls character-
oriented terminal traffic.
TFTP
Trivial File Transfer Protocol. TFTP can be used to download a new
Flash image.
Trap
A trap is an unsolicited event sent from an agent to a network
management station. Examples of traps include cold start, port
autopartition and backup port enabled.
UDP
User Datagram Protocol provides unreliable connectionless delivery
service using IP. It adds the ability to distinguish among multiple
destinations within a given host.
UTP
Unshielded Twisted Pair cable is usually connected using RJ-45
connectors.
Workstation
A single computer in a client/server environment that serves one user.
XMODEM
A serial communications protocol used to transfer ASCII or binary data.
XMODEM uses 8-bit characters and transfers data using 128 byte
blocks, each of which is followed by a checksum or CRC. If the
checksum (CRC) on a block is correct, the next block is sent; otherwise
the same block is retransmitted.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netelligent 2624Netelligent 3512Netelligent 3612

Table of Contents