Compaq Netelligent 2524 User Manual page 13

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-2 Overview
Smart Uplink capability extends the distance between repeaters to up to
100 meters/328 feet (or 412 meters/1352 feet with fiber). This allows
integration of multiple 100 Mb/s repeaters into an existing 100Base-T
configuration without normal repeater hop limitations.
TX, FX (ST), and FX (SC) Smart Uplink modules available
Four-group RMON (Remote MONitor) support allows remote diagnostic
monitoring via the network management system (Model 3612 only)
Fast Ethernet wiring standards ensure compatibility with all types of
UTP cabling
2524/2624 repeaters are stackable up to three units high (as long as the
stack contains a 2624 model), providing up to 72 workstation
connections. The 3512/3612 repeaters are stackable up to five units high
(as long as the stack contains a 3612 model), providing up to 60
workstation connections.
2524/2624 repeaters allow one backplane segment per stack, connected
via a backplane connection cable (Part No. 283305-001).
3512/3612 repeaters are segmentable on a per-unit basis; or, by
interconnecting repeaters with a FlexPlane backplane connection cable
(Part No. 810172-000), all repeaters in a stack can share up to three
common backplane segments.
Host/target design allows unmanaged repeaters (Models 2524 or 3512)
to be managed by a single managing repeater (Models 2624 or 3612).
2524 and 2624 repeaters provide an internal 110W power supply. 3512
and 3612 repeaters provide redundant hot-swappable load-sharing power
supply (90W) capability .
Compaq Netelligent Management Software is included free of charge
(2624 and 3612 managing units).
Port intrusion and security support (Model 3612 only)
Rack-mountable chassis