Table of Contents
Advertisement
NOTE:
After reboot, the system runs with the initial default configuration, but the original configuration file is
•
still stored in the storage medium. To restore the original configuration, use the display
saved-configuration command to display the configuration, and then copy and execute the
configuration.
If the password is stored in plain text, you can use the display current-configuration command to view
•
the password in the current configuration. If the password 123456 is set with the set authentication
password cipher command, the password is stored in cipher text.
Save the new password.
4.
[Sysname] save
NOTE:
•
To save the new password, execute the save command after modifying the user password.
HP recommends saving the modification as the default configuration file.
•
Super password loss
In the case of super password loss, you cannot perform higher level operations.
You can clear the super password by selecting 8 on the main BootWare menu.
========================<EXTEND-BootWare MENU>========================
|<1> Boot System
|<2> Enter Serial SubMenu
|<3> Enter Ethernet SubMenu
|<4> File Control
|<5> Modify BootWare Password
|<6> Skip Current System Configuration
|<7> BootWare Operation Menu
|<8> Clear Super Password
|<9> Storage Device Operation
|<0> Reboot
======================================================================
Enter your choice(0-9):8
The following output indicates that you have successfully cleared the super password.
Clear Application Password Success!
NOTE:
Select option 8, quit the menu, reboot the firewall, and then you can enter system view directly.
•
This setting (password clearing) is valid only for the first reboot of the firewall. The super password will
•
be restored after a second reboot.
Cooling system failure
When the temperature inside the firewall exceeds 75°C (167°F), the following information appears on
the configuration terminal:
62
|
|
|
|
|
|
|
|
|
|
Advertisement
Table of Contents
