Installation flow
Figure 12 HP F5000 firewall installation flow
Check before installation
Follow these steps to prepare for installing an HP F5000 firewall:
Make sure that you have read
•
the requirements.
Prepare a 19-inch rack.
•
Make sure that the rack is sturdy and securely grounded and has enough space for mounting the
•
firewall.
•
Make sure that there is no debris inside or around the rack.
Move the firewall to a place near the rack.
•
IMPORTANT:
To mount multiple devices in the rack, mount the heavier equipment at a lower position.
Installing the firewall in a 19-inch rack
To install an F5000 to a rack, you need mounting brackets and rack shelves.
Installing cage nuts to the rack
Follow these steps to install cage nuts to the rack:
"Preparing for
installation" carefully and the installation site meets all
15