Installing An Mpu - HP F5000 Installation Manual

Figure 18 Connect the grounding cable to the grounding hole of firewall
NOTE:
To guarantee the grounding effect, use the grounding cable provided with the firewall to connect to the
grounding strip as long as possible.

Installing an MPU

NOTE:
• The F5000 supports only one MPU, which must be installed in slot 0.
Typically the firewall does not provide a filler panel for slot 0 when it is shipped because you must install
•
an MPU to the slot for the firewall to operate.
Follow these steps to install an MPU:
Gently push the MPU along the slide rails into the slot and then push the ejector levers inward to
1.
lock the MPU in position.
19