Advertisement
Fan tray overview
The HP F5000-S/F5000-C Firewall uses the following fan tray. The fan tray has four fans.
The firewall can automatically adjust the speed of the two front fans
ambient temperature, and the speed of the two rear fans, depen
temperature.The firewall support hot swapping of the fan tray.
Handle
Replacing a fan tray
Be aware of electrical hazards when replacing a fan tray on an operating firewall.
The fan tray is hot swappable. After you remove a fan tray
firewall, install a new one within 2 minutes to ensure correct he
firewall.
Keep the removed fan tray that is not used immediately in an antistatic bag.
Tools required
ESD wrist strap
1
, depending on the
ding on the CPU
Fan
Captive screw
from an operating
at dissipation of the
Phillips screwdriver
Advertisement
Table of Contents
Related Manuals for HP F5000-S
Summary of Contents for HP F5000-S
- Page 1 Fan tray overview The HP F5000-S/F5000-C Firewall uses the following fan tray. The fan tray has four fans. The firewall can automatically adjust the speed of the two front fans , depending on the ambient temperature, and the speed of the two rear fans, depen ding on the CPU temperature.The firewall support hot swapping of the fan tray.
- Page 2 Push the fan tray in the slot until it is firmly seated in the slot. Fasten the captive screws on the fan tray. To find related documents, browse to the Manuals page of the HP Business Support Center website: http://www.hp.com/support/manuals 5998-5096 ©...
Need help?
Do you have a question about the F5000-S and is the answer not in the manual?
Questions and answers