Replacing A Fan Tray - HP F5000 Installation Manual

Figure 49 Press the eject button
Press the eject button again to eject the CF card part-way out of the CF card slot, and then pull the
3.
CF card out of the CF card slot.
Figure 50 Press the eject button to eject the CF card
Install a new CF card. For more information, see the chapter
4.

Replacing a fan tray

CAUTION:
The firewall supports automatic fan speed adjustment and hot-swapping of the fan tray.
•
• Keep your hands away from the spinning fan blades when removing the fan tray.
Follow these steps to replace a fan tray:
Use a Philips screwdriver to loosen the captive screws of the fan tray to be removed until all spring
1.
pressure is released.
Gently pull the fan tray out of the slot along the slide rails.
2.
54
"Installing the firewall."