Table of Contents
Advertisement
Displaying the CPU usage of a module
Use the display cpu-usage command to display the CPU usage of the module in each slot.
<Sysname> display cpu-usage
Unit CPU usage:
3% in last 5 seconds
3% in last 1 minute
3% in last 5 minutes
Table 11 Output description
Field
3% in last 5 seconds
3% in last 1 minute
3% in last 5 minutes
Displaying the memory usage of the MPU
Use the display memory command to display the memory information of the MPU.
<Sysname> display memory
System Total Memory(bytes): 1874838960
Total Used Memory(bytes): 552515624
Used Rate: 29%
Displaying the CF card information
Use the display device cf-card command to display the CF card information.
<Sysname> display device cf-card
Compacted Flash Card Information:
CF ID 1
Status: Normal
Size
: 247M bytes
CF ID 2
Status: Absent
Table 12 Output description
Field
CF ID
Status:
Size:
Description
Average CPU usage in the last five seconds (after the firewall boots, the firewall
calculates and records the average usage at the interval of five seconds).
Average CPU usage in the last one minute (after the firewall boots, the firewall
calculates and records the average usage at the interval of one minute).
Average CPU usage in the last five minutes (after the firewall boots, the firewall
calculates and records the average usage at the interval of five minutes).
Description
Slot number of the CF card
Operational status of the CF card:
•
Absent—No CF card is present in the slot.
•
Fault—The CF card fails.
•
Normal—The CF card is operating properly.
Storage capacity of the CF card
46
Advertisement
Table of Contents
