Table of Contents
Advertisement
[SUBCARD
[SUBSLOT
[SUBSLOT
[SUBSLOT
Displaying the operational statistics of the firewall
When you perform routine maintenance or the system fails, you may need to view the operational
information of each functional module for locating failures. Generally, you need to run display
commands one by one. To collect more information one time, you can execute the display
diagnostic-information command in any view to display or save the operational statistics of multiple
functional modules of the firewall. This command displays the output of the display clock, display version,
display device, display current-configuration commands, and so on.
•
To save the operational statistics of each functional module of the firewall, type y when the system
prompts you to save or display the diagnostic information.
<Sysname> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:y
Please input the file name(*.diag)[cfa0:/default.diag]:aa.diag
Diagnostic information is outputting to cfa0:/aa.diag.
Please wait...
Save successfully.
Execute the more aa.diag command in user view, and then press the Page Up and Page Down keys to
view the contents of the file aa.diag.
To display the operational statistics of each functional module of the firewall, type n when the
•
system prompts you to save or display the diagnostic information. The output is too much and
omitted here.
<Sysname> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:n
=================================================
===============display clock===============
=================================================
08:54:16 UTC Fri 11/12/2010
===================================================
===============display version===============
===================================================
...Omitted...
Displaying the detailed information about a module
Use the display device verbose command to display detailed information of modules in each slot.
<Sysname>display device verbose
Status
Type
MPUA PCB
SWBA PCB
MPUA Basic
MPUA Extend CPLD:
SWBA
1] NSQ1GT8C40
(Hardware)Ver.B,
2] The SubCard is not present
3] The SubCard is not present
4] The SubCard is not present
: OK
: RPU
: B
: A
CPLD:
3.0
1.0
CPLD:
1.0
(Driver)1.0,
44
(Cpld)1.0
Advertisement
Table of Contents
