Table of Contents
Advertisement
11. INSTALLATION OF FRONT FEEDER and
Note : Below options are to be installed by an authorized RS reseller.
Installation of the Front Feeder Option (Includes 2 brackets,
one spindle, and mounting hardware).
1. Install the Front Feeder to the inside of the front frames using
six 5/32(M4) round head screws on each side (Figure 1)
Installing the Rear Rewinder Option (Includes motorized
winder, bracket, one spindle, and mounting hardware).
2. Place the left rewinder on the cover-rear, faster with round
head 5/32 (M4) screws (include in the option bit).(Figure 2)
3. Install the right rewinder on the cover-rear and connect the
motor wire connector to the rear wire.(Figure 3,4)
REAR REWINDER OPTIONS
12
Figure 1
Figure 2
Figure 3
Figure 4
Advertisement
Table of Contents
