Removing The Ccd - Clevo W547KU Service Manual

Disassembly

Removing the CCD

Figure 11
CCD Removal
1. Turn off the computer, turn it over to remove the optical device
2. Carefully remove the rubber screw covers
a. Carefully remove the
3. Run your fingers around the inner frame of the LCD panel at the points as indicated by the arrows
rubber screw covers and
4. Lay the computer down on a flat surface with the top case up forming a 90 degree angle. Push the LCD front
screws from the front
cover
cover.
k. Run your fingers around 5. Remove the LCD front cover
the inner frame of the
LCD panel at the points
a.
indicated by the arrows.
l. Lay the computer down
on a flat surface with the
top case up forming a 90
degree angle. Push the
LCD front panel upwards
before carefully lifting it
up.
d. Remove the LCD front
cover.
b.

9. LCD Front Cover
• 2 Screws
2 - 16 Removing the CCD
upwards before carefully lifting it up.
9
(Figure
9
1
3
7
6
5
(page 2 - 5) and battery
- and screws - from the front cover
1 2 3 4
11c).
c.
2
4
d.
8
(page 2 - 7).
(Figure 11a).
- .
5 8
9
9