Removing the Wireless LAN Module
1. Turn off the computer, turn it over to remove the optical device
2. The Wireless LAN module will be visible at point
3. Carefully disconnect the cables
4. The Wireless LAN module
5
a.
1
b.
2
3
on the mainboard
1
&
, and then remove the screw
2
3
(Figure
10c) will pop-up, and you can remove it from the computer.
c.
5
4
(page 2 -
5) and battery
(page 2 -
(Figure
10a).
(Figure
10b)
4
5
Removing the Wireless LAN Module 2 - 15
Disassembly
Figure 10
Wireless LAN
7).
Module Removal
a. Locate the WLAN.
b. Disconnect
the
and remove the screw.
c. The WLAN module will
pop up and lift it out of
the computer.
Note: Make sure you
reconnect the antenna
cable to the "1 + 2"
socket
(Figure
5.Wireless LAN Module
• 1 Screw
cable
10b).