Removing The Hard Disk Drive - Clevo W547KU Service Manual

Removing the Hard Disk Drive

The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height of 9.5mm
(h). Follow your operating system's installation instructions, and install all necessary drivers and utilities (as outlined in
Chapter 4 of the User's Manual) when setting up a new hard disk.
Hard Disk Upgrade Process
1. Turn off the computer, turn it over to remove the optical device
2. The hard disk drive will be visible at point
a.
1
(page 2 - 5) and battery
(Figure 5a ) .
1
(page 2 - 7).

HDD System Warning
New HDD's are blank. Before you
begin make sure:
You have backed up any data
you want to keep from your old
HDD.
You have all the CD-ROMs and
FDDs required to install your op-
erating system and programs.
If you have access to the internet,
download the latest application
and hardware driver updates for
the operating system you plan to
install. Copy these to a remov-
able medium.
Removing the Hard Disk Drive 2 - 9
Disassembly
Figure 5
HDD Assembly
Removal
a. Locate the HDD assembly.