Step 2: Install The Battery And Replace The Battery Cover; Step 3: Charge The Battery; Step 4: Insert The Getting Started Cd Into The Cd Drive Of Your Personal Computer - HP iPAQ rw6800 User Manual

NOTE If the battery is already installed, remove it before inserting the
SIM card. The SIM card is provided by a mobile phone service
provider. The SIM card may already be preinstalled in your HP iPAQ.
1. With your fingernail, pull the SIM card holder up.
2. Slide the SIM card into the SIM card holder.
NOTE Be sure that the metal contacts are facing down and that the
notched corner is in the correct position.
3. Push the SIM card holder back into its original position.

Step 2: Install the battery and replace the battery cover

1. Align the battery connectors on the battery with the housing pins in
the battery compartment and insert the battery.
2. Slide the battery cover on until it clicks into place.

Step 3: Charge the battery

CAUTION To avoid damaging your HP iPAQ or the AC Adapter, be sure
all connectors are properly aligned before connecting.
The battery provides power for your HP iPAQ to operate. Your HP iPAQ
comes with a mini-USB synchronization cable, which you must use to charge
the device.
It takes about 1.5 hours to fully charge the battery.
1. Insert the USB end of the mini-USB cable into the port on the AC
Adapter.
2. Connect the AC Adapter to an electrical outlet.
3. Connect the mini-USB cable to the charging/communications port on
your HP iPAQ. The cable connector only fits one way, so do not force
it. If the connector does not insert easily, turn it over.
IMPORTANT Whenever a replacement battery is inserted into your
HP iPAQ, press and hold the Power button for at least two seconds or
attach an AC Adapter to turn on your device.
Step 4: Insert the Getting Started CD into the CD drive of your
personal computer
Use the Getting Started CD to complete the setup of your HP iPAQ and to
synchronize the HP iPAQ with your personal computer.
The HP Install Wizard automatically opens, and the application starts to
run.
IMPORTANT Do you have administrative rights on your personal
computer? If not, you may have problems installing the applications from
the Getting Started CD. Your administrator needs to install the
applications.
–10