Step 2: Install The Battery And Replace The Battery Cover - HP iPAQ Business Navigator Product Manual

3. Place the SIM card into the SIM card slot.
NOTE:
position.
4. Slide back the SIM card slot cover until it locks into place.

Step 2: Install the battery and replace the battery cover

1. Align the battery connectors on the battery with the housing pins in the battery compartment, and
insert the battery.
2. Place the battery cover down and slide up until it locks into place.
8 Chapter 4 Set up your HP iPAQ
Make sure that the metal contacts are facing down and the notched corner is in the correct