Table of Contents
Advertisement
Step 5: Follow the on-screen instructions on your personal computer
The HP Install Wizard installs:
• Microsoft Outlook 2002
• Microsoft ActiveSync
• Other optional software applications
Microsoft ActiveSync
Connect your HP iPAQ when instructed.
1. Connect the USB end of the synchronization cable to a USB port on
your personal computer.
2. Connect the mini-USB end of the synchronization cable to the
charging/communications port on the bottom of your HP iPAQ. The
connector only fits one way so do not force it. If the connector does
not insert easily, turn it over.
When instructed, check the items you want to synchronize between your
HP iPAQ and your personal computer. Do one or both of the following:
• Select the check box for any items you want to synchronize. If you
cannot select a check box, you may have to clear the check box for
the same information type elsewhere in the list.
• Clear the check box for any items you want to stop synchronizing.
To change available synchronization settings, select the type of information
and tap Settings.
IMPORTANT Does your company use a Microsoft Exchange server? If
not, during setup, uncheck the box marked Synchronize directly
with a server running Microsoft Exchange Server. To do this
now, you need to have the server address and your logon credentials in
order to sync to your personal computer.
After completing the ActiveSync installation, return to the HP Install
Wizard for more software programs and additional product and setup
information.
Step 6: Set up your HP iPAQ
When you turn on your HP iPAQ for the first time, follow the instructions on
the screen. Use the stylus to enter information. (See the product component
illustrations for the location of the stylus.)
Protecting Your HP iPAQ with a Password
You can help keep your data more secure by requiring a password every
time you turn on your HP iPAQ.
1. Tap Start > Settings > Personal tab > Lock > Password tab.
2. Select the Prompt if device unused for check box, and select the
amount of time from the list box that your HP iPAQ must be unused
before the password is required.
3. In the Password type field, select the type of password you would
like to use. Enter the password and confirm the password.
4. On the Hint tab, enter a phrase to help you remember your
password.
–11
Advertisement
Table of Contents
