Setting Up A Pop3, Http, Or Imap4 E-Mail Account - HP iPAQ rw6800 User Manual

2. Tap Menu > Configure Server.
If you have not set up a synchronization server link, the following
message is displayed: Add Server Source.
3. In the Server address box, enter the name of the server running
Exchange 2003.
4. Select the This server requires an encrypted (SSL)
connection check box if required by your IT department.
Most companies require this option, and if you do not check this box,
you cannot sync with your company Exchange Server.
5. Tap Next.
6. Enter your name, password, and domain, and then tap Next.
7. Select the Save password text box if you want to enable
automatic sync.
8. To change the rules for resolving synchronization conflicts, tap
Advanced.
9. Select the check boxes for the types of information items that you want
to synchronize with Exchange Server.
10. To change available synchronization settings, select the type of
information and tap Settings.
11. Tap Finish.
You can set up your HP iPAQ to synchronize with Exchange Server over a
wireless network or through a cable, infrared, or Bluetooth connection to a
personal computer. You must have the following information to sync
wirelessly: server name, user name, password, and domain name.
NOTE Synchronizing directly with Exchange Server is supported only on
Windows Mobile-powered Pocket PC 2002 or later.
By clicking Tools > Options, you can determine whether an
information type is synchronized with a personal computer or with
Exchange Server.

Setting up a POP3, HTTP, or IMAP4 E-mail Account

To send and receive mail, you need to set up an e-mail account with an
Internet Service Provider (ISP) or have an account that you access using a
virtual private network (VPN) server connection (typically a work account).
Be sure you have the proper plan with your wireless service provider and
your connections have been set up correctly.
To set up an e-mail account on your HP iPAQ:
1. Tap Start > Messaging.
2. Tap Menu > Tools > New Account.
3. Enter your e-mail address, and tap Next.
Auto configuration attempts to download necessary e-mail server
settings so that you do not need to enter them manually.
4. Once Auto configuration has finished, tap Next.
5. Enter your name (the name you want displayed when you send e-
mail) and your password.
–25