Left and Right Side Components
Component
Volume Up Button
1
Volume Down Button
2
Infrared (IR)
3
Record Button
4
Digital Camera Button
5
Setting Up Your HP iPAQ
Use the following steps to quickly set up your HP iPAQ and connect it to your
personal computer. The illustrations in the previous sections display the
specific location of the HP iPAQ components.
Step 1: Remove the battery cover and slide in the SIM card
To remove the battery cover, slide the battery cover down and away from
the HP iPAQ.
LEFT
Function
Press to increase the volume
Press to decrease the volume. Press and hold to use the voice
command capability.
If your personal computer has infrared and appropriate
software installed, you can transfer data between your
HP iPAQ and personal computer using the infrared window
without using a cable connector.
Press to record voice or sound.
After you frame the subject in the camera lens, you may
either press this Shutter button or tap the Shutter button on the
screen to capture the photo.
RIGHT
–9