Advertisement
430/616 Ember-Glo™ Log Set Inst.
3. Place the right log as shown below. The notch on the bottom right of the log rests on the grate. Push
the log backwards until it is in contact with the sloped area between the front and rear burner. Make
sure burner holes are not obstructed.
4. Detail around the burner with ember chunks. Cover any exposed metal between the side of the grate
and the side of the firebox. Stack ember chunks over any portion of the perforated metal along the
front of the unit that IS NOT over the Ember-Glo lights (see picture below to the right).
Page 7 of 13
430 = Oak - sku# 94500957 - Birch - sku# 94500956
616 = Oak - sku# 94500952 - Birch - sku# 94500951
17602084 — 8/22/19
Do not cover
Ember-Glo lights
© Travis Industries, Inc.
Advertisement
