Cleaning And Maintenance - Dometic Oceanair Skysol Frame Manual Installation And Operating Manual

Cleaning and maintenance

I
NOTE
The motors have a built-in, self resetting thermal cut-out for safety rea-
sons. Prolonged use or over loading the blind could trigger the cut-out.
If this happens allow the motor to cool for up to half an hour.
9 Cleaning and maintenance
A
NOTICE! Damage hazard
• Do not grease, oil or lubricate the blind. Lubricants will damage the
fabric.
• Rubbing can damage the fabrics.
• Spot-cleaning may result in cleaner areas than the surrounding.
• Do not soak the blinds.
• The manufacturer recommends testing any cleaning agents on a
hidden area of the blind first.
➤ Proceed as shown to clean the blind.
d
24
Skysol Frame
EN