Dometic Oceanair Skysol Frame Manual Installation And Operating Manual page 18

Installation
7.3 Connecting the blinds (only for powered blinds)
The electrical power supply must be connected by a qualified electrician
who has demonstrated skill and knowledge related to the construction
and operation of electrical equipment and installations and has received
safety training to identify and avoid the hazards involved.
The powered blinds are available for a connection to a 12/24 Vg power supply. The
data plate on the head rail provides important information on the specifications of
the motor specific to the blind.
The following notes must be observed when connecting the blinds:
• Ensure cables are not damaged during installation. Routings of cables through
walls or bulkheads must be protected and insulated by appropriate bushing,
grommets or cable conduits.
• Ensure that a 12 V or 24 V stabilized power supply line is available for the drive at
the point of installation. The power supply line is suitably arranged and pro-
tected.
• Secure all cables to prevent any contact with moving parts.
• Only use power supply units and control elements recommended by the manu-
facturer to prevent damage or faults during operation caused by incompatible
electrical components.
• Control devices (e.g. switches) must be installed in visible locations.
➤ Connect the motor as shown in the wiring diagrams.
Dometic Radio Controlled Blind External Receiver
bk
1
rd
12 V/24 V DC
Dometic 9 Chn, 433 MHz Transmitter
18
Dometic Radio Receiver
12 V/24 V DC
4
3
wh
HEADRAIL
bk/wh
2
Atlantic 12S - Double End
Atlantic 24S - Double End
HD TM24
Skysol Frame
12 V DC
24 V DC
24 V DC
EN